Nurgle Heldrake - Blight Drake – Coversion WIP: Carapace

After my short excursion with my Raven Guard I am back on track with the Blight Drake. After finishing the body I started working on the carapace. As a first step I mapped out how I want to create the carapace using Photoshop. Doing some mock ups digitally gave me a good idea on the ideal number (and size) of segments as well as on the concavity of the carapace.

I then started modelling the carapace with green stuff, starting at the very with a small segment as a proof of concept. To make sure I am able to reproduce the same "hammer finish" look of the armour of the original drone I bought some ball-shaped pluggers on ebay. I was quite happy with the result of the armour. Something I wasn't happy with at all were the edges of the carapace segment. The resin parts are too thin and fiddly to reproduce them with Greenstuff in a proper way (at least for me).

So I went back and segmented the carapace of the Blight Drone using Plasticard. It took some time to get the shape and size of all the different archs right, and a little bit of more time to actually to fit them into the back, but it spending the time was worthwhile. Now I not only have a proper template for each segment, the Plasticard also helps to reproduce the same look and quality of carapace of the original model. 

Next step is actually (and finally) start modelling the carapace. I am really looking forward to it, especially when it comes to modelling all the corroded elements - I assume it will just as fun as working on rotten flesh (this sounds weird). 

Spreading the Focus: Raven Guard Centurions and Land Speeder Storm

I am fiddling around with the Blight Drake for quite some time. Good thing is that I am getting there. The Underbelly is done and now I have to work on the upper carapace (to then do the detail work on the belly). Bad thing is my progress is slow... simply because I don't have that much time for the hobby at the moment. It is exhausting and because of that I had to do something else, something were I can have something done rather quickly to have the feeling to have something accomplished.

So I did a little break from the Blight Drake and worked on some support for my Raven Guard. I started building a Landspeeder Storm (the more Scouts the better) and Centurions. Even though I couldn't resist to some minor adjustments to the models - I am going to remove all heraldry, icons, purity seals etc. from my Raven Guard - I was able to put the miniatures together rather quickly. And it was a joy not to worry and wonder about how you are going to put something together or how to model it, but to just glue it in place and its done. The only thing I still have to do building wise is to magnetize the weapons of the Centurions... but this is going to be a different story. 

From now on I definite will work on two or three things in parallel to make sure to get some diversion. I always thought that this is bad, but with projects that drag along over weeks and months it is good and healthy and to be able to jump on something else to get some distraction and the feeling of having actually something accomplished. 

Nurgle Heldrake - Blight Drake – Coversion WIP: Building the Body

As I have promised myself, here is a recent update on the so called Blight Drake. I am currently modelling the main body, which mainly consists of bloated, rotten and torn open old leathery skin. The more I work with greenstuff, the more fun it is. What is important, at least from my experience, is patience: the longer you wait/the more time you have to work on the sculpt constantly, the better you can work out the details. Wounds for example: I wait around 2 hours before I start sculpting them. By this time the greenstuff is firm enough to be cut and ripped open without damaging the base form; at the same time you still can shape it good enough. Same goes for the leathery texture of the skin, which I, in order to get the same look as the skin of the Blight Drone has, created by cutting the putty with a knife over and over again.

There are are some parts I am not so happy with, but once the base modelling is done (including the carapace) I will come back and fix those issues: it's minor things most people won't notice like wounds that are shaped too similar or wobbly body parts that don't hang correctly taken the slightly tilted stance the Blight Drake will have on the flight stand into consideration.  

Nurgle Heldrake - Blight Drake – Coversion WIP: Foundation

My focus right now is to get a Nurgle army ready (again). Even though it should be painted I am currently more eager to get the troops ready for the table so I can play with them. The building will take time as I basically going to convert every miniature in the core army, which is based on Codex CSM. So before I start the painting, I will do a lot of building.

Something I was playing around in my mind is to build a “proper” Nurgle Heldrake. The dragon works for the Alpha Legion (just add two more heads), Iron Warriors or maybe even a Khorne army… but not for a Nurgle force (at least from my point of view).

I am a big fan of the Forge World Blight Drone, but unfortunately it is too small to be used as a Heldrake. So, why not let it grow into a… Blight Drake? That’s basically what I am trying right now.

The foundation of the model is a Blight Drone with a Tervigon’s spawning sack in the middle. I got the Blight Drone cheap on ebay… and it turned out to be a recast, which sucks. The quality of the cast is bad and the resin is brittle as hell, so all the details like the cables broke of by just looking at them. Not good at all. At the same time, I will have to do a lot of sculpting work anyway, so I will “just” spend some more time on fixing the crappy recast issues. One thing I learned already for the future: I will only order direct from Forgeworld again, even though I might hack and cut the miniature to bits and pieces for a conversion.

First step was to build the frame. After gluing the head- and tailpieces to the spawning sack – they were fixed with aluminum rod – I glued sprue pieces as some kind of artificial bones into belly to stabilize it. I also (something I forgot when I built the Daemon Prince) also inserted a piece of plastic rot for the custom flight stand in the middle of the daemon engine. While going crazy with the plastic rod I also added connection struts for the rotor arms and the exhaust pipes.

To get the base shape I crammed aluminum foil into the body, pressed and squeezed it around until I was happy and covered it up with green stuff – I trick I learned from good friend of mine (thanks Flo!).

After the base shape was established I started with the work on the belly. First I added some metal straps because the Blight Drone has those as well; they are basically holding the whole wobbly body together and I want this to be reflected on the whole model. To make sure they look consistent I removed all the resin studs from the Blight Drone pieces and replaced them with the “water-filter”-ones I used for the big straps on the neck and the belly. After adding some machine parts – I used bits and pieces from the Thanquol & Boneripper and the Stormfiends kits (I have more plans with those guys for the Nurgle force) – I started with the sculpting of the skin.

As with the Daemon Prince I want the look of the skin to be consistent. So I either sand of all the details of the skin of the Blight Drone or I re-sculpt the belly in a way that it looks the same. I go with the latter option. It is more work (and I have no idea if I can pull it off), but it also looks more disgusting.

While glue/green stuff was drying I worked on the rotors. As the whole body is bigger, those need to be bigger as well. At first I was a bit puzzled how to re-build them, but after a visit in the hobby- and the do-it-yourself stores I got plenty of plastic tubes, a drainpipe and a rough idea. Getting the base construction wasn’t too complicated, even though the sawing of the big grey drainpipe drove me crazy: I just wasn’t able to get two similar and (that was the hardest part) straight pieces. Around 7 attempts (including a lot of swearing, the usage of different saws and the building of a weird Skaven-style construction to keep everything in place) later I had two pieces that were good enough…they weren’t perfect, but they will be covered in green stuff anyway.

Building the inner construction with the plastic tubes was a lot of fun and I begin to understand why (especially Ork) players love to build custom vehicles. For cutting the rotors out of the rather thick plastic boards (2,5mm) I bought a special compass (with a knife instead of a needle/pencil lead). I took some time and some additional sanding, but without this tool I wouldn’t have been able to get the rotors the way I wanted them.

That’s it for now. I will continue sculpting the belly and, while waiting for the green stuff to get hard, drill more corrosion holes in the rotors.

Daemon Prince of Nurgle: Maggot Spawn - Aftermath

As written in my last blog post, it took some time to get the Daemon Prince of Nurgle done. To document to process – I tried a couple of things with this miniature (I, for example, stripped the color of the wings four times until I found a good formula to paint them) – and progress and took some pictures on the way. As I was busy not only with the the Daemon Prince itself, but also with the „normal life“ I didn’t post any of them here on the Hobby Blog.

So below, there are some WIP images. From now on I will try to post updates more frequently again. 

Base

Daemon Prince Body & Wings

Daemon Prince of Nurgle: Maggot Spawn - Done

It took me almost three month to get flying Daemon Prince of Nurgle done. There was just too much going on in the non-hobby-life. At the same time, when I had some spare minutes to work on him, I experimented a bit with colors and techniques, which also resulted in investing more time than initially expected. As I am quite happy with the result, I don't mind that it took that long after all.
I added for example brown spots on his skin, to make it more diverse and interesting... there was simply too much grey-green as a whole. I applied the first layer to define the shape with a sponge and then worked those spots up with different washes. The use of washes was extensive on this miniature; I never was a friend of washes but I start to like (and understand) them.

The base is another custom piece. The foundation is a Corpse Field Base from Secret Weapons Miniatures, but a changed the ground, added tree stumps, exchanged the heads of the corpses and put some maggots on the bodies to feast on them.

As said, I am overall happy ho the Maggot Spawn turned out, but I hope that I won't need that long for my next Nurgle project.

 

Daemon Prince of Nurgle: Maggot Spawn - Conversion Done

The conversion of the flying Daemon Prince of Nurgle is done. After the skin was completed I continued with the carapace. At first I planned to put one big horn right above the head (and get rid of the small horns on the side) but after getting some really valuable feedback from a friend I went with the original design.
The carapace turned out rather clean as there was going to be a lot of details on the skin: details in pustules in different shapes and sizes, open wounds and maggots that crawl out of them. They way I imagine it, the Plague Prince is spawning the maggots, they drop to the ground feast on the corpses, grow and turn into Beast of Nurgle which eventually will become Plague Drones. That's what Nurgle is all about: The Circle of Life! As with the scared skin I also tried to keep the look of the Pustules in line with the ones from the Plague Ogryn Leader.
I played around with different trophies and trinkets but - as with the details on the carapace - stayed away from adding any as the skin was pretty noisy already. In the end I only went with a set of bells for the horns.
The Maggot Spawn is not ready for getting painting (the wings are just tagged using blue tag) which I will - along with building the base - do next. Can't wait to get the Plague Prince ready for the battlefield.